| Model No.PAP2T | รายละเอียด |
|---|---|
| Feature-Rich VoIP Service through your High-Speed Internet Connection |
- Enables feature-rich telephone service over your broadband Internet connection - Two standard telephone ports for analog phones or use one of the ports for a fax machine, each with an independent phone number - High quality, clear sounding voice service simultaneous with Internet use - Compatible with all common telephone features: Caller ID, Call Waiting, Voicemail, etc. |
| Features |
- Two voice ports (RJ-11) for analog phones or Fax machines - Impedance Agnostics - 8 Configurable Settings - Call Waiting, Cancel Call Waiting, Call Waiting Caller ID - Caller ID with Name/Number (Multi-national Variants) - Caller ID Blocking - Call Forwarding: No answer, Busy, All - Do Not Disturb - Call Transfer - Three-way Conference Calling with Local Mixing - Message Waiting Indication - Visual and Tone Based - Call Return - Call Back on Busy - Call Blocking with Toll Restriction - Delayed Disconnect - Distinctive Ringing - Calling and Called Number - Off-hook Warning Tone - Selective/Anonymous Call Rejection - Hot line and Warm Line Calling - Speed Dialing of 8 Numbers/Addresses - Music on Hold |
| Package Contents |
- PAP2T Phone Adapter Unit - Power Adapter - RJ-45 Ethernet Cable - Quick Installation Guide |
| Specifications |
Model PAP2T
* Note: Many specifications are programmable within a defined range or list of options. Please see the PAP2T Administration Guide for details. The configuration profile is uploaded to the PAP2T at the time of provisioning.
Data Networking MAC Address (IEEE 802.3)
IPv4 - Internet Protocol v4 (RFC 791) upgradeable to v6 (RFC1883) ARP - Address Resolution Protocol DNS - A Record (RFC 1706), SRV Record (RFC 2782) DHCP Client - Dynamic Host Configuration Protocol (RFC 2131) ICMP - Internet Control Message Protocol (RFC792) TCP - Transmission Control Protocol (RFC793) UDP - User Datagram Protocol (RFC768) RTP - Real Time Protocol (RFC 1889) (RFC 1890) RTCP - Real Time Control Protocol (RFC 1889) DiffServ (RFC 2475), Type of Service - TOS (RFC 791/1349) SNTP - Simple Network Time Protocol (RFC 2030)
Voice Gateway SIPv2: Session Initiation Protocol v2
(RFC 3261, 3262, 3263, 3264) SIP Proxy Redundancy - Dynamic via DNS SRV, A Records Re-registration with Primary SIP Proxy Server SIP Support in Network Address Translation Networks - NAT (incl. STUN) Secure (Encrypted) Calling via Pre-Standard Implementation of Secure RTP Codec Name Assignment
Voice Algorithms G.711 (A-law and .-law)
G.726 (16/24/32/40 kbps) G.729 A G.723.1 (6.3 kbps, 5.3 kbps) Dynamic Payload Adjustable Audio Frames per Packet
Fax Capability Fax Tone Detection Pass-Through
Fax Pass-Though - Using G.711 DTMF: In-band & Out-of-band (RFC 2833) (SIP Info) Flexible Dial Plan Support with Interdigit Timers and IP Dialing Call Progress Tone Generation Jitter Buffer -Adaptive Frame Loss Concealment Full Duplex Audio Echo Cancellation (G.165/G.168) VAD - Voice Activity Detection with Silence Suppression Attenuation / Gain Adjustments Flash Hook Timer MWI - Message Waiting Indicator Tones VMWI - via FSK Polarity Control Hook Flash Event Signaling Caller ID Generation (Name & Number) - Bellcore, DTMF, ETSI Music on Hold Client Streaming Audio Server - up to 10 sessions
Security Password Protected System Reset to Factory Default
Password Protected Admin and User Access Authority
Provisioning/Configuration/Authentication:
HTTPS with Factory Installed Client Certificate HTTP Digest - Encrypted Authentication via MD5 (RFC 1321) Up to 256-bit AES Encryption Provisioning,Web Browser Administration & Configuration via Integral Web Server
Administration & Telephone Key Pad Configuration with Interactive Voice
Prompts
Maintenance: Automated Provisioning & Upgrade via HTTPS, HTTP, TFTP
Asynchronous Notification of Upgrade Availability via NOTIFY Non-intrusive, In-Service Upgrades Report Generation & Event Logging Stats in BYE Message Syslog & Debug Server Records - Per Line Configurable
Physical Interfaces: 1 10baseT RJ-45 Ethernet Port (IEEE 802.3)
2 RJ-11 FXS Phone Ports - For Analog Circuit Telephone Device (Tip/Ring)
Subscriber Line Ring Voltage: 40-55 VRMS Configurable
Interface Circuit Ring Frequency: 10 Hz - 40 Hz
(SLIC): Ring Waveform: Trapezoidal and Sinusoidal
Maximum Ringer Load: 3 REN On-hook/off-hook Characteristics: On-hook voltage (tip/ring): -50 V NOMINAL Off-hook current: 25 mA min Terminating Impedance: 8 Configurable Settings including
Regulatory North America 600 ohms, European CTR21
Compliance: FCC (Part 15, Class B), cUL, CE, IC-003, A-Tick
Power Supply: DC Input Voltage: +5 VDC at 2.0 A Max.
Power Consumption: 5 Watts Switching Type (100-240v) Automatic Power Adapter: 100-240v - 50-60Hz (26-34VA) AC Input, 1.8m cord
Indicator Lights/LED:Power, Ethernet, Phone1, Phone2
Documentation: Quick-Start Installation and Configuration Guide
User Guide Administration Guide - Service Providers Only Provisioning Guide - Service Providers Only |
| Environmental |
Dimensions 3.98” x 3.98” x 1.10” (101mm x 101mm x 28mm) W x H x D
Unit Weight 5.40 oz. (0.153kg)
Operating Temp. 32. to 113.F (0. to 45.C)
Storage Temp. -77. to 158.F (-25. to 70.C)
Operating Humidity 10 to 90% Non-condensing
Storage Humidity 10 to 90% Non-Condensing
|
